Description
Protects RVers by Sensing and Alarming When LP Gas Levels are Unsafe Power Source Input: 12 VDC Max 300mA ETL Listed & Tested to UL 1484 for Residential and RV Applications Approximate Overall Sensor Dimensions (without included wall plate): 3″ x 4″ x 1″ Mounting Hardware Along with Wall Plate and Wires Included This Atwood LP Gas Detector is designed to properly detect dangerous concentrations of propane gas and alert users to unsafe conditions. This unit operates in Seven Different Modes. Normal Stand By Mode: Green LED indicates that gas concentration is continuously monitored at a safe level. Test button will be active. Alarm Mode: Red LED indicates that gas concentration has reached unsafe levels. The audible alarm activates. Press test button go reset. Indicator returns to green when LP concentrations have been removed. Test Mode: When testing the LED indicator is red and the audible alarm sounds for 10 seconds. Silence Stabilization Mode: LED indicator flashes red for 3-minutes after power up or after the detector is reset. If gas concentrations remain high, the alarm will reactivate. Fault Mode: Yellow LED with alarm chirping every 30 seconds indicates a fault has been detected that compromises function. Press test button to reset. Power off Mode: Visually indicates sufficient and insufficient power. LED and button will not function in this mode. End of Life Mode: After 7 Years +/- 128 days of continues operation a flashing yellow led with alarm chirping every 30 seconds indicates the sensor is no longer reliable and must be replaced. Once end-of-life mode, it is permanent, meaning the alarm cannot be reset.
- Protects RVers by Sensing and Alarming When LP Gas Levels are Unsafe
- Power Source Input: 12 VDC Max 300mA
- ETL Listed & Tested to UL 1484 for Residential and RV Applications
- Approximate Overall Sensor Dimensions (without included wall plate): 3″ x 4″ x 1″
- Mounting Hardware Along with Wall Plate and Wires Included
Reviews
There are no reviews yet.