Gas Leak Detector High Sensitivity White 12-24V Combustible Gas Leak LPG Natural Gas Detector Propane Alarm

Description

Professional 2019 NEW Gas Leak Detector

Specification :

Brand new
Material : metal + plastic
Color : white
Size : approx. 115 * 72 * 41 mm
Type : network
Installation : wall-mounted
Environment humidity : ≤ 95 % RH
Operating temperature : -10 ℃～ + 50℃
Operating voltage : 12 V-24 V DC
Standby current : ≤ 90 mA
Alarm current : ≤ 100 mA
Warm-up (stabilisation) time : 180s
Power indicator : green LED
Alarm gas level : 10 ± 5 (% LEL), 0.5 ± 0.25 (VOL %)
Alarm sound level : ≥ 85 dB/m
Alarm indicator : red LED, flashing
Failure indicator : yellow LED on , continuous tone

Feature :

Two status LED indicating power , alarm and fault conditions.
Flammable gas detector with 85db alarm.
12 V-24 V model with non-polarised (reversible) power terminals for easy wiring.
Built-in switch-output terminal pair for integration into external alarm system.
Easy to ‘real-world’ test : power the device, allow it to stabilise (180 seconds), bring safe gas source into proximity.
Easily-accessible ‘alarm test’ button.
Accords with safety standard GB15322.2-2003.
Compact and versatile .
Stable and reliable.
Fine workmanship and good performance.
Easy to install , easy to deploy.
Detects propane , butane , LPG , natural , town , coal , common flammable gasses
Suitable for leisure craft , vehicles and similar 12V-24V scenarios.

Package included :

1 x gas detector
1 x manual
1 x screw
1 x rawlplug

• Main function. Detect leaking gas and drive the valve or manipulator of the gas pipeline to shut off(if connected with a valve or manipulator), or send out some signal to the main panel to make an alarm(if connected with a Golden Security alarm system).
• 7/24 Hours Protection. You can add it to the defense line of 24 hour zone to provide your house a 7/24 hours protection.
• Connect with Valve Or Manipulator. If the detector is connected with a valve or manipulator, when it detects leaking gas, the LED light flashes, and will drive the valve or manipulator to shut off the gas pipeline supply.
• Automatically Reset Itself After Alarm. The detector will automatically resume to detecting state after the gas dispersed.
• Note. Avoid installing the detector close to the following sources of interference: direct air flow from vents, fans, doors, windows, sources of steam, oil vapor, etc.