Partsam Rectangular Red LED RV Camper Trailer Stop Turn Brake Tail Lights White License Plate Light 49 LED with License Bracket Holder and White Base 12V Sealed w Reflex Surface Mount (Left + Right)

Description

• 8-5/8″ x 3-7/8″ Rectangle Trailer Tail light Kit serves 3 functions: stop light, turn signal light, taillight. Perfect for surface mount on CAMPER TRAILER. At the bottom of the left hand driver’s side, you can see a license plate light and license plate mounting brackets built in. Red lens. White plastic base.
• left hand driver’s side: 27 Diodes( 22 Red++5 White ); Right Hand Passenger’s Side: 22 Diodes; this light uses LEDs, which make great replacements for incandescent lights. They last about 50 times longer. They are more efficient, provide better light with less power output, and of course there’s not bulbs to replace, or not brittle filaments.
• It is designed to mount on the surface of a trailer and Camper etc.; there’s three wires to connect. White is your ground wire, black is your taillight, and then the red is the brake and turn signal. This light is SAE and DOT approved.
• Dimension: overall length: 8 5/8″, The height: 3 7/8″ and the total depth is 1 3/5″; Mounting Holes are Approx. 7″ by 2 1/2″ Apart.
• Easy Installation: This light is Surface mount, which means that it installs flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.

• 8-5/8″ x 3-7/8″ Rectangle Trailer Tail light Kit serves 3 functions: stop light, turn signal light, taillight. Perfect for surface mount on CAMPER TRAILER. At the bottom of the left hand driver’s side, you can see a license plate light and license plate mounting brackets built in. Red lens. White plastic base.
• left hand driver’s side: 27 Diodes( 22 Red++5 White ); Right Hand Passenger’s Side: 22 Diodes; this light uses LEDs, which make great replacements for incandescent lights. They last about 50 times longer. They are more efficient, provide better light with less power output, and of course there’s not bulbs to replace, or not brittle filaments.
• It is designed to mount on the surface of a trailer and Camper etc.; there’s three wires to connect. White is your ground wire, black is your taillight, and then the red is the brake and turn signal. This light is SAE and DOT approved.
• Dimension: overall length: 8 5/8″, The height: 3 7/8″ and the total depth is 1 3/5″; Mounting Holes are Approx. 7″ by 2 1/2″ Apart.
• Easy Installation: This light is Surface mount, which means that it installs flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.